Free gifts included
- Microfiber Towel
- horse hair brush
- cleaning sponge
From $109
GET UP TO 30% BACK
Contact Us
Working on a larger project? Save 30% on a Kit
Shop NowFree gifts included
From $109
GET UP TO 30% BACK
With its powerful and effective formula, Clyde's Leather Cleaning Foam effortlessly removes even the toughest dirt and stains. This gentle, hygienic cleaning foam leaves your leather looking better than new.
Clean leather surface using Clyde's Leather Cleaning Foam and a rag. This removes dirt and dust that has been buried in the leather pores.
Our industry standard deglazer removes all types of factory-applied finishes, including adhesives, glue, polish and wax, without burning or marring your leather. The result? Leather prepped for recoloring.
Warning: Product contains acetone, ethanol, and methanol which can be harmful or Fatal if swallowed.
Your leather must be absorbent before applying our leather recoloring balm. Here's how to check:
Place a few droplets of water on the surface of the leather, preferably somewhere that has no damage. If the water is absorbed into the leather, and the color of the leather surface darkens, this means your leather is absorbent. This means the manufacturer's original leather finish has worn off or was never applied.
If the water sits on top of the surface of the leather, this means your leather is non-absorbent. There’s nothing to worry; this is normal. This means that the manufacturer's leather finish is still coating your leather. You just need to strip the manufacturer's finish using our deglazer.
Whether it's scratches on your furniture, scuffs on your car seats, or blemishes on your favorite jacket or shoes, Clyde's has got you covered, ensuring impeccable results on all types and colors of leather.
Step 1: Clean the area, and fill the area with the filling paste using an applicator.
Step 2: Let it dry completely, or use a heat gun or hair dryer to speed up drying time.
Step 3: Once dry, sand it down so it's nice and smooth against the leather.
Step 4: Wipe the sanded area and use Clyde's Leather Recoloring Balm to match the colored area.
Our high-tech recoloring balm recolors leather while improving its lifespan tenfold; restoring leather's natural color, filling in old scratches, and much more!
More text here about the recoloring balm…
Your leather must be absorbent before applying our leather recoloring balm. Here's how to check:
Place a few droplets of water on the surface of the leather, preferably somewhere that has no damage. If the water is absorbed into the leather, and the color of the leather surface darkens, this means your leather is absorbent.
If not, you will need to use Clyde's Leather Prep and Deglazing solution.
100 ML [Best Value]
Select Color —
Once the balm has completely cured it is advised that you don't apply more. Thus, we recommend having the recommended amount at time of application. That being said, a little goes a very long way.
If you have extra after your restoration job, we'll pay you to send it back for a refund or we'll discount the original order. Don't hesitate to contact us for assistance!
Jacket: 25ML
Purse: 25ML
Mid-size Couch: 100ML
Large Couch: 200ML
Saddle: 50ML
Car Seat: 25ML/Seat
Our ultra-rich leather conditioner coats each fiber and is quickly absorbed, leaving your leather soft, supple, and ready to wear without any messy greasy residues.
Massage the conditioner into the leather using circular motions with a lint free cloth or sponge. The remoisturizing cream doesn’t need to dry, but it may take a couple of hours to fully absorb. 3. After 5-6 hours of conditioner curation, you are ready to use your new leather!
Includes 3 Free Gifts Worth $45
Still need help? Contact our 24/7 Customer Serivce to chat with someone from our help desk.